Sunday Morning Setup
How to start live streaming
Turn on the camera by sliding the power switch forward
Insert the memory card to slot "A" if it's not already in. It's the little door when you open the screen on the left side of the camera below the power button
Shut the door
Video Switcher
Make sure the switcher is on. It should come on when you turn on the power strip under the soundboard
By default, the only button you need to press is the "MIC 1" "ON" button in the top left corner of the switcher (it will turn red)
Currently, we don't use any of the other abilities of this device
Ensure all cables are correctly plugged in (from left to right)
1/8" audio from the soundboard
HDMI from camera
USB-C output to computer
Unit power supply
Recording Video
Press record on the camera
A red timer with a red circle will appear in the top middle of the screen
Press the record button again when the service is finished to stop the recording
Recording Audio
Plug the USB stick in the top middle of the soundboard
Press the "VIEW" button just right of the USB drive
Press the dial under the screen below "RECORD"
Press the dial under "STOP" when the service is over
Ensure all cables are correctly plugged in (from left to right)
1/8" audio from the soundboard
HDMI from camera
USB-C output to computer
Unit power supply
MAKE SURE TO STOP THE VIDEO RECORDING BEFORE REMOVING THE SD CARD OR TURNING OFF THE CAMERA!
STOP THE AUDIO RECORDING BEFORE UNPLUGGING THE USB DRIVE OR SHUTTING THE SOUNDBOARD OFF